Rolling / Fabrication Press
Please email or bring in your rolling drawings for us to have a look at.
We specialise in sectional rolling as specified below:
Pipe: 12 OD to 170 OD
Square Bar: 6mm to 90mm
Round Bar: 6mm to 90mm
Angle: 20 x 20 to 150mm, 150mm toe out only all other section toe in or toe out. Small sections roll point (><) or point out (<>)
RHS: 20 x 20 to 150 x 150
Flat Bar: 16mm to 150mm can be rolled on edge.
Universal Beam: 100 to 150 UB x 22 on edge and 100 – 300 as a monorail.
Channel: 50 x 25 to 250 x 90 these sizes toe in or toe out, up to 125 x 50 on edge.
Universal Column: Up to 150 on edges or as a monorail.
We have medium size pyramid rolls – 3 metres long. Press small sections up to 3.6 metres long.
250 Tonne Brake Press
- 1mm – 5mm x 4000mm Long (small sections)
- 5mm – 8mm x 3600mm Long (large sections)
- 10mm x 3000mm Long
- 14mm x 2800mm Long
- 16mm x 1200mm Long
- PIPE: 12mm diameter – 168mm diameter
- ROUND BAR: 6mm diameter – 90mm diameter
- SQUARE BAR: 6mm – 90mm
- RHS: 20mm x 20mm – 150mm x 150mm
- FLAT BAR: up to 150mm x 16mm (rolled on edge)
- ANGLE: 20mm x 20mm x 3mm – 150mm x 150mm x 16mm (toe in, toe out or as a diamond)
- UNIVERSAL BEAM: up to 250mm UB 37.3 (monorail)
- CHANNEL: 50mm x 25mm – 250 PFC (toe in or toe out)
- 1mm – 3mm x 2400mm Long
- 5mm – 12mm x 3000mm Long
- 16mm x 2400mm Long
- 20mm x 1000mm Long
- 32mm x 600mm Long
- Sheet-metal: 1mm – 3mm x 2400mm Long
- Plate: 3mm – 12mm x 3600mm Long